The Advantages Of A Tight And Well-designed Layout For Pre-insulated Sleeves.

insulated joint sleeve A compact and excellent layout is not only reflected in the overall appearance, but also provides a better foundation for future maintenance and replacement.

1. Terminals should be evenly distributed across the entire board surface with consistent spacing.

2. pre insulated sleeve Do not fill the entire board surface; leave a certain gap around the edges of the board. The size of the gap depends on the size of the printed circuit board and the fixing method.

3. Under normal conditions, all pre insulated junction sleeve components should be placed on the same side of the printed circuit board. Only when the components on the top layer are too dense can some components with limited height and low heat generation, such as surface-mount resistors, capacitors, and ICs, be placed on the bottom layer.

4. Terminal placement should not be crossed vertically. A certain distance should be maintained between two adjacent components to avoid contact.

5. While ensuring electrical performance, components should be placed on a grid and arranged parallel or perpendicular to each other for neatness and aesthetics.  Overlapping components are generally not allowed; components should be arranged compactly, and input and output components should be kept as far apart as possible.

6. The installation height of the terminals should be as low as possible. Generally, the component body and leads should not be more than 5mm away from the board surface.  Higher heights reduce stability under vibration and impact, making them prone to tipping over or contacting adjacent components.

7. Determine the axis direction of the components based on the installation position and state of the high-current terminals on the printed circuit board in the overall system. For regularly arranged components, the axis direction of larger components should be vertical in the overall system to improve the stability of the components' fixation on the printed circuit board.

Considering the overall aesthetics of the terminal block, the success of a product depends on two factors: first, focusing on the intrinsic quality of the terminals, and second, considering the overall aesthetics of the terminal block. Only when both are perfect can the product be considered successful.