Analysis Of The Forming Process Of Suspension Clamp Structures!

Power fittings are a general term for components that connect and combine parts of a power system, serving as accessories that transmit mechanical loads, electrical loads, and provide protection. This cable clamp plays a role in suspending and fixing power cables and optical cables during installation. How is the structure of ab cable suspension clamp formed? Let's take a look!

abc suspension clamp consists of a U-shaped bracket and a clamping block fixed to the bracket. The clamping block has a through groove along its central axis for clamping the cable, and the top surface of the clamping block also has an opening connected to the through groove. The bracket includes first and second clamping arms that hold the clamping block. The first clamping arm has a mounting component for fixing the bracket. The bottoms of the two clamping arms are pivotally connected by a pivot shaft. The clamping block and the clamping arms are fixedly connected, and a locking mechanism is designed at the opening of the bracket. When installing the cable, due to the pivotal connection between the two clamping arms, the clamping space formed by the first and second clamping arms on the bracket can be opened, making it easier to stretch the cable through the opening of the clamping block.  With this structure, j hook suspension clamp, since the clamping block is fixed on the bracket, there is no need to worry about the clamping block falling off.

suspension clamp for ab cable During installation, the bracket is first installed on a fixed object (such as a utility pole or tower), then an insulating block is attached to the cable, and then the cable and the insulating block are installed together into the bracket. The use of suspension clamp for abc cable can reduce the stress on the cable at the suspension point, control the stress from wind vibration, and assist in damping the cable, thus better protecting the cable.