What Are The Reasons For Smart Meter Tripping? How To Solve It?

Recently, a friend who just moved into the apartment found me and said that the 3 phase smart energy meter at home suddenly tripped for some reason. I want to ask what caused the single phase smart meter trip and how to solve it?

Reason 1: Leakage protection tripping, overload tripping

Solution: If it trips due to the above reasons, there will be an air switch and a leakage switch next to the wifi smart energy meter. First press the air switch. When the air switch cannot be pressed, you can try to press the leakage switch. If the leakage switch still cannot be pressed, then you should consider looking for a professional solution. Recommended reading: Which protocol specifications does 3 phase energy meter wifi comply with? What are the advantages?

Reason 2: Tripping due to arrears

Solution: The direct reason for the tripping due to arrears is that we did not pay the bill in time. At this time, we need to take out our mobile phone to pay the bill to energy meter 3 phase wifi. After receiving the information that the electricity bill has been received, the power supply will be restored in about 15 minutes. At the same time, we need to press the white button of the instrument smart energy meter 3 phase for about 5 seconds, and the indicator light will dim. Then we can use electricity normally.

Reason three: Tripping due to stolen electricity

Methods for remote tripping due to stolen electricity: 1. The power company can manually issue a remote pull command as needed to achieve remote tripping; 2. By installing control software on the upper computer of the energy meter, the software automatically issues a switching command through the communication line connected to the energy meter to achieve remote tripping. .

Finally, I want to tell you something you must pay attention to

Before closing the wifi smart energy meter 3 phase, it is recommended to turn off all electrical appliances in the home, because if the load is large, the instantaneous increase in current when the air switch is directly closed may not be able to withstand it, and the surface phenomenon may scare the user and easily generate sparks. Therefore, we try to let some professionals turn on the power and send the power.