Visually Inspect The Tilt Of The Clamp Body Of The Parallel Trench Line.

Before performing line connection work, a visual inspection of the installation status of clamp bimetal pg clamp should be conducted. During the inspection, observe whether the upper and lower housings of clamp blackburn parallel groove clamp are aligned. If clamp burndy parallel groove clamp is found to be significantly tilted, it should be removed and re-aligned to ensure a tight interlocking of the upper and lower housings on the plane.

When observing the relative positions of clamps connector parallel groove, confirm that the busbar clamp and branch clamp are aligned. If clamp groove clamp is structurally misaligned, it may affect the clamping state of the conductors in the groove, leading to poor contact or abnormal resistance.

Compare the geometric relationship between the bolt fixing points and the clamp housings with the model drawings or installation instructions. If the bolts are found to be not perpendicular to the housing surface or torn, they should be adjusted immediately to restore the normal clamping angle between the housings.