The Coordination Between The Mechanical Properties Of The Parallel Groove Clamp And The Pantograph

The sliding load between the catenary cable electrical connection parallel groove clamp and the soft copper stranded wire shall not be less than 4.0 kN.
4) The sliding load between the catenary cable electrical connection parallel groove connector and the catenary cable shall not be less than 4.0 kN.
5) The sliding load between the parallel groove electrical connection aluminium pg clamp and the soft copper stranded wire shall not be less than 4.0 kN.
(3) Coordination with the pantograph
The contact wire electrical connection bimetal pg clamp shall cooperate well with the pantograph with a maximum driving speed of 250 km/h. The pantograph shall not be hit when deflected to the left or right by ±30°, and it shall be noted whether the installation direction is related to the driving direction. The total weight of each set of contact wire electrical connection blackburn parallel groove clamp (including fasteners) shall be as light as possible and should be controlled within 600 g.