Blog

Fretting Wear Characteristics Of Wires In Suspension Clamps

Publish Time: Author: Site Editor Visit: 9

ab cable suspension clamp fretting wear feature is that the chemical composition of the conductor surface will change in the wear area, which is caused by the material exchange with the external environment and chemical reactions such as oxidation during the abc suspension clamp wear process.
Feature explanation: Describes the changes and reasons of the chemical composition on the surface of the j hook suspension clamp conductor. Material exchange and chemical reactions change the chemical composition.
Fretting wear of the overhead conductor with protective wire at suspension clamp for ab cable will change the dancing characteristics of the conductor. This is because wear affects the mass, stiffness and damping parameters of the conductor.
Feature explanation: Points out the changes and causes of the dancing characteristics of the suspension clamp for abc cable conductor. Wear affects the mass, stiffness and damping parameters of the conductor.
After fretting wear of the suspension clamp for lt ab cable conductor, the wind erosion resistance of the suspension clamp outer aluminum strands will be reduced. This is because the wear damages the protective layer on the surface of the aluminum strands, making it more susceptible to erosion by wind and sand.
Feature explanation: Explains the changes and causes of the wind erosion resistance of the outer aluminum strands. Wear damages the protective layer and makes the aluminum strands susceptible to erosion.

Fretting Wear Characteristics Of Wires In Suspension Clamps

Next Technical Communication On The Numbering Of Insulation Dimensions Of Wedge-type Tension Clamps