Problems That Should Be Paid Attention To In Crimping Cold Terminal
First of all, we need teachers to make full use of the learning method to understand what they are going to study through the use of Cable Lugs, keep in mind its operation risk management system method to ensure that students can handle technical operations correctly. For cold-pressed terminals that do not have anti-misoperation, color codes or marks should be used to identify them, or whether the appropriate model can be matched before connection, and ensure the correct direction of the development strategy when connecting between the mutual relations of our corporate culture. At the same time, special attention is also required to prevent the mis-insertion of the pin socket, so as not to cause damage to the terminal and cause accidental electrical contact.
Special care must be taken to ensure that the cold-pressed terminal connection is correct. If the workplace is unusual, you will need to specify appropriate rules and can check them through a mirror. When terminating, it should be strictly checked and terminated in the corresponding specifications or requirements according to the corresponding series connection. The thickness of the cable should be between the insulation layer and the contact wire that matches the pitch used in the cable, and the cable core should match the terminal contact point when the cross member contacts the line.
In addition, if the business of the cold-pressed terminal is in a separate working state, then we need to take some corresponding dust prevention measures. If it is not separated for a long time after connection, social insurance can be developed between the plug and the socket. Clean the cold terminal, wire can be used in ethanol, use dry dipping. Students who may be affected by a large number of harmful elements such as acetone chemical reaction solvent connectors are not allowed to use the process.
It is necessary to remind that whether by connection or disengagement, it is recommended that the axis of the plug and socket coincide, and to straighten the cable to prevent the plug from being taken to prevent the Chinese cable connector from being damaged by tangential force that can cause natural sagging. The front cold terminal equipment is not connected correctly or is not locked at all, and power is prohibited. When fixing, clamping the wiring harness, etc., a threaded connection with an enterprise locking control device is used.
In addition to inspection and testing, you need to follow relevant instructions in this process. Generally, the electrical connectors used and acceptance tests should be in accordance with relevant product standards and instructions for waste cold terminal operation should be intact, acceptable performance, the probe should meet the standard requirements, or it will cause damage to the socket.
