Morseto estanco para acometida

Morseto estanco para acometida. Watertight insulation piercing connector

Morseto estanco para derivaciones entre un cable preensamblado de aluminio y un conductor de aluminio o cobre. Su tamaño y rango lo hacen ideal para conexiones de acometida domiciliaria, así como derivaciones a la intemperie en general. Fabricado con materiales de primera calidad, asegura una conexión estanca, completamente protegida ante las más extremas condiciones, sin necesidad de pelar previamente los conductores. La utilización de un bulón con cabeza fusible asegura la correcta instalación por parte del operario (sin necesidad de utilizar herramental especializado). Su diseño evita cualquier daño a la aislación de los conductores, impidiendo a su vez el contacto de los mismos con las partes metálicas expuestas.

DCNL insulation piercing connectors are designed for performing tap connections (in copper or aluminum) from an overhead aluminum line. Manufactured with high quality materials, a premium water- and air-tight connection is ensured, enclosed to protect the conductors from water, dirt, debris and environmental elements in general. Shear-head bolt guarantees proper installation using standard tooling. Insulation piercing design eliminates the need for stripping the conductors, while avoiding contact with exposed metallic components (bolt and nut are completely isolated from the energized parts of the connector).

Cuerpo / Body:

Nylon 6/6 con carga de fibra de vidrio (33%).

Nylon 6/6 ( 33 % glass fiber reinforced).

Bulón / Screw:

Hierro con tratamiento Delta Protekt 1000 Hs.

Iron with Delta Protekt 1000h surface treatment.

Cabeza fusible - torque 10 N (1 kgf). / 10 N shear head.

Norma de fabricación Applicable standard: IRAM 2435, NFC33004, NFC33022 y ANSI C 119.4-2004

Condiciones de utilización Conditions of use: Intemperie (Cables Aéreos) Outdoor use

Tipo de herramienta a emplear para la instalación Tooling: Llave estriada o de tubo Ø13mm 13mm box or socket wrench

• Range-taking
• Suitable for XLPE, PE or PVC conductors
• Waterproof
• Captive and flexible end caps
• All components are solid and fixed in place
• Equipped with shear head to ensure a reliable tightening torque
• Operating temperature -55°C to +55°C
• Installation temperature -20°C to +55°C
• Can be installed on energized main if not under load

1. STREET LIGHT CONNECTIONS 

In this application, insulation piercing clamp are generally used to tap the main ABC Cable and connecting it to a service line that powers streetlights or other applications.

2.DISTRIBUTION BOX CHARGING CONNECTION

These insulated piercing connector are used to tap the main ABC Cable Line to charge Low Voltage Distribution Boxes which are further connected to different applications such as residential connections, street lights, etc. SMICO Low Voltage Distribution Boxes can provide up to 9 outgoing connections for each incoming line.

3.JUMPER CONNECTION

These IPC are generally used with the same size of cable on each side to facilitate T-Connections (90° turns) or any other high angle turn.

4.TAP OFF/MULTI-TAP CONNECTION TO HOUSEHOLDS

These insulation piercing connector are used to tap the main ABC Cable and bring power to households. Using the Multiport IPC, a one-tap connection from the mainline can be used to bring connections to multiple households.

How to install SMICO Insulation Piercing Connectors (IPC) for Aerial Bundled Cables

01.What is a mechanical cable lug?

A mechanical lug is a heavy-duty electrical connector that uses screws or bolts to secure a conductor, rather than requiring specialized crimping tools. They are designed for easy installation in the field and are often used for larger cables in electrical and construction applications.

02.Is the clamp easy to install in the field?

Yes, the clamp is designed for easy installation, which can save time and reduce the need for specialized tools or extensive training.

03.Can the clamp accommodate different cable sizes?

Yes, it is designed to accommodate cable sizes ranging from 15 to 95mm², offering versatility for various cable specifications.

04.What materials are used in the construction of the High Electric Power ABC Accessories Tension Clamp?

The clamp is made from high-quality materials such as PA66 (a type of nylon) and aluminum alloy, which provide a combination of strength, durability, and resistance to weather and aging.

05.How to select cable lug size?

Selecting the correct lug size depends entirely on matching its rated conductor range to the precise cross-sectional area of the copper cable.

06.How does a mechanical lug work?

Lugs are crimped or bolted to the end of a wire, creating a secure connection to a terminal or bus bar. They often feature a mechanical set screw or compression mechanism for a reliable and durable attachment. Splices are connectors designed to join two or more wires together, ensuring electrical continuity.

07.Are SMICO Dead End Clamps reusable?

No. They are designed for single use to ensure consistent clamping force, insulation protection, and long-term reliability under mechanical and environmental stress.

08.What are the key features of SMICO Dead End Clamps?

• Corrosion-resistant aluminum alloy body

• Pre-assembled, ready-to-install design

• Operating temperature range: -20°C to 90°C

• Applicable Conductor Cross-Section: 16 mm² – 150 mm²

09.Do SMICO Dead End Clamps come with third-party test reports?

Yes. All SMICO Dead End Clamps are supported by independent third-party test reports, verifying compliance with relevant performance, safety, and durability standards.

10. What standards do SMICO Dead End Clamps comply with?

SMICO Dead End Clamps are manufactured in compliance with the international standard NFC33-042,EN50483-3, ensuring safety and operational performance.