Various Lightning Protection Measures For Copper-clad Grounding Rods

copper bonded rod Various lightning protection measures, the most effective and widely used way is grounding lightning protection. Different grounding lightning protection methods are different in different areas. The grounding module is used reasonably. When the cable TV line passes through special areas such as hills and hills, the number of grounding bodies should be increased or the grounding bodies should be welded into a ground grid. If there is soil with high resistivity, the grounding resistance should be reduced by adding resistance reducing agents. If the buried position is extremely special, a special cement pole should be set up and a lightning rod should be used.

The equipment housing in the cable TV transmission network must be connected to the supporting steel stranded wire, and then the ground wire and grounding module grounding body are installed on both sides of the equipment to increase the lightning protection effect. If necessary, resistance reducing agents should be added to the grounding soil. Pay attention to installing ground wires at the terminals of the trunk and branch lines.

copper rod for earthing price It can play an important protective role in the wiring process and will not cause certain damage to people during the use of power equipment, affecting life and health. The simplest way for traditional electricians is to connect water pipes and heating pipes as the earth, which are all buried deep underground.

However, this is an old method. Nowadays, pipes have surface coatings. Although this has no effect when the electrical equipment is normal, it loses its safety protection function. Once the electrical equipment leaks electricity, electric shock accidents may occur. Some users insert a wire or steel bar into the ground, and regardless of whether the grounding resistance is appropriate, they use a wire to connect it to the metal casing of household appliances such as refrigerators and washing machines. These are not in compliance with the requirements.