Blog

Sharing On The Safe Installation Method Of Tension Clamps

Publish Time: Author: Site Editor Visit: 144

Copper Terminal block is a hardware used to fix the conductor to withstand the conductor tension and hang the conductor on the tension string group or pole tower. How to better and safely install the tension clamp is a commonly ignored problem. The power hardware manufacturer will tell you.

Safety installation steps for tension clamps 1. When installing bolt-type clamps at high places, the bolts must be fully installed and tightened before the traction rope can be loosened;

Safety installation steps for tension clamps 2. When installing tension clamps for conductors and lightning conductors (optical cables) at high places, reliable measures must be taken to prevent the wire from running;

Safety installation steps for tension clamps 3. The wire ends cut on the pole tower should be lowered with ropes;

Safety installation steps for tension clamps 4. When installing on the ground, the anchoring of conductors and lightning conductors (optical cables) should be reliable, and the anchoring work should be performed by technicians;

Safety installation steps for tension clamps 5. The safety relief valve of the hydraulic pump shall not be adjusted at will, and the relief valve shall not be used for unloading.

Sharing On The Safe Installation Method Of Tension Clamps

Next Power Fittings Manufacturers Talk About The Tensile Strength Of Crossarms