How To Install A Rail-mounted Smart Meter: A Simple And Easy Step-by-step Guide

The DIN-rail type smart energy meter is a common electric energy metering device, which is usually used in industrial and commercial power places. Correct installation of the DIN-rail type 3 phase smart meter is one of the key steps to ensure its normal operation and accurate measurement. This article will introduce the installation steps of the DIN-rail type three phase smart meter to help users install and use it correctly.

1. Preparation: Before starting to install the DIN-rail type 3 phase wifi energy meter, you need to do the following preparations:

Ensure power off: During the installation process, always ensure that the power is disconnected to avoid the risk of electric shock.
Prepare tools: Prepare the tools required to install the DIN-rail type single phase wifi energy meter, such as screwdrivers, wrenches, etc.
2. Install the rail: First, you need to install the rail and fix the rail in the installation position. Make sure that the rail is installed firmly, stable and reliable.

3. Connect the DIN-rail type 3 phase smart energy meter: Place the DIN-rail type single phase smart meter on the installed rail and ensure that the connection with the rail is firm. According to the installation instructions of wifi smart energy meter, connect 3 phase energy meter wifi to the rail, usually fixed by screws.