Engineering Practice Of Suspension Clamp

In engineering practice, when using ANSYS Workbenchaerial cable suspension clamps for nonlinear contact analysis, setting the angle suspension clamp friction coefficient to 0.1 can make the simulation results match the measured data to 93%. In a converter station supporting line project, by adjusting the ratio of the harga suspension clamp suspension point offset ΔL to the span L from 1.2% to 0.8%, messenger suspension clamp was combined with the optimized layout of the anti-vibration hammer to successfully reduce the cumulative damage caused by breeze vibration by 62%. When the thickness of the hot-dip galvanized layer increased from 86μm to 100μm, the salt spray test showed that the corrosion rate decreased by 28%, but it would cause the coating brittleness to increase, resulting in a 15% increase in the probability of suspension clamp with i hook microcrack initiation.