Device And Process For Forming Silicone Rubber Fiberglass Tube Using Forming Trough

1. The silicone rubber glass fiber pre insulated sleeve demoulding device comprises a frame, an oil pan is arranged on the frame, a base is arranged at the bottom of the frame, and a first support frame is arranged on the base; 2. A first fixing seat is arranged on the top of the first support frame, a second support frame is arranged on the base, a second fixing seat is arranged on the top of the second support frame, and the oil pan is installed on the second fixing seat and the first fixing seat; 3. A sealing cover is arranged on the upper part of the oil pan, and a molding groove is arranged between the sealing cover and the oil pan, and the cross section of the molding groove is a rounded square; a hydraulic cylinder is arranged on the top of the frame, and a piston rod is arranged at the lower part of the hydraulic cylinder, and the piston rod is arranged vertically, and the upper end of the piston rod is connected to the oil pan. The lower part of the hydraulic cylinder is connected, and the lower end of the piston rod is connected to the upper part of the top shell; 4. A first buckle frame and a second buckle frame are provided on the top of the frame, and a guide tube is provided between the lower parts of the first buckle frame and the second buckle frame, the guide tube is arranged vertically, and the piston rod passes through the guide tube; 5. A first docking frame is provided between the first support frame and the second support frame, and a second docking frame is provided between the first support frame and the second support frame, and the first docking frame and the second docking frame are arranged in parallel; 6. A fixing frame is provided between the lower end of the piston rod and the upper part of the top shell, the first fixing seat and the second fixing seat are both in an arc shape, and the bottom shell and the top shell are buckled by snaps. 7. After constructing the above device, the silicone rubber fiberglass pre insulated junction sleeve frame is convenient for fixing and supporting the bottom shell through the first support frame and the second support frame; the first support frame fixes and supports one end of the bottom shell through the first fixed seat, and the second support frame fixes and supports the other end of the bottom shell through the second fixed seat; the hydraulic cylinder can vertically lift and lower the top shell through the piston rod, so that the top shell and the bottom shell can be firmly connected; the hydraulic cylinder vertically lifts and lowers the top shell through the piston rod to control the separation of the top shell and the bottom shell, thereby realizing the smooth demoulding of the silicone rubber fiberglass insulated joint sleeve.