Brief Introduction To Inspection Methods Of Electrical Fittings (i)

1. Insulation Piercing Connector Visual Inspection [Visual Inspection]

An inspection of the appearance mainly by visual observation;

2. Type Tests [Type-tests]

A test conducted on components designed and manufactured according to certain technical conditions to show that the design meets certain standards;

3. Sampling Tests [Sampling Tests]

A test conducted by randomly extracting a certain number of products produced under the same conditions;

4. Routine Tests [Routine Tests]

A test conducted on each component during or after manufacturing to determine whether it meets a certain standard;

5. Mechanical Failing Load Test [Mechanical Failing Load Test] 【dtests】

The load value at which the specimen reaches the maximum load and is destroyed under the specified test conditions;

6. Grip strength test 【gripstrengthtests】

The grip strength value of the wire clamp for installing the conductor is measured under the specified test conditions;

7. Vibration test 【vibrationtests】

The test is conducted to measure the vibration of each component of the vibration isolator under specified conditions;

8. Resistance test 【resistancetests】

The test to measure the resistance value of the conductive element with direct current;

9. Temperature rise test 【temperature-risetests】

The temperature rise test of the conductive element is measured under specified conditions;