Analysis Of Relevant Parameters Of Ukk Junction Box

1. Application: din rail power distribution block is mainly suitable for indoor and outdoor electrical, communication, fire fighting equipment, steel smelting, petrochemical, electronics, electricity, railways, construction sites, mines, mining sites, airports, hotels, ships, large factories, coastal factories, unloading terminal equipment, sewage treatment facilities, environmental pollution facilities, etc.

2.4 pole distribution block Material:

New materials imported from Taiwan, high-quality thermoplastic plastics ABS or (PC) polycarbonate, or materials can be selected according to customer requirements, flame retardant materials, UV protection materials can be customized, and the top cover has two forms of transparent and opaque (materials are non-corrosive, anti-static, and have good insulation)

3. Box thickness:

The average thickness of the thinnest part of the 4 pole power distribution block body is 3mm, the thickness of important parts is strengthened (will not deform), impact strength IK07 (cannot be crushed); flame retardant grade V0. (resistant to high temperature baking, long-term use without fading), lightweight (easy to install, and can be moved at will).

4.din rail power distribution terminal blocks Waterproof performance: Super waterproof, protection level reaches IP66 or above, even if it rains heavily during operation, water will not enter, very safe.

5. Certification:

The product has passed CE certification, the material can be made (environmentally friendly, flame retardant, UL material, etc. certification), and the waterproof level IP66 certification test has passed.

6. Installation method:

1. Internal installation - the power distribution block 4 pole box has a boss for installing circuit boards or DIN rail components, and comes with copper wire nuts (each din distribution block box is equipped with at least two very common M4 copper nuts)

2. External installation - can be directly fixed to the wall through the mounting hole at the bottom of the electrical power distribution blocks box (can be directly fixed to the wall or board with screws or nails through the four corners of the power terminal blocks electrical box.)

7. Inlet and outlet holes:

power distribution terminal can be opened at will according to the customer's use requirements (the opening position and opening size can be processed according to the customer's specified requirements.) After the hole is opened, it can be equipped with a matching waterproof clamping joint to achieve the best waterproof effect.

8. din power distribution service life:

Conventional materials are generally about 5 years depending on the use environment. If the material is added with flame retardants and anti-aging agents [antioxidants, the life can reach more than 10 years. Heat deformation temperature: -40~~85 degrees.